Inverted Sole Football Boot Outsole

Submitted 8 years ago

Introduction: https://www.youtube.com/watch?v=c6B2oR875aA

The Inverted Sole is part of the outsole and it is located to the heel area in an inverted position. The first mode gives fairly similar reach to all of the studs in the heel area and it is suitable for firm ground and artificial grass. If you turn the sole part 180 degrees the reach of the studs that are further in the heel increases and it can penetrate deeper to the soft ground and it gives better traction on a soft wet grass.

With the Inverted Sole it is faster and easier to increase traction compared to replaceable studs. If you change replaceable studs you need to screw every different stud separately and it is very time consuming, hard work and needs a lot of installed iron parts to the outsole. Also every stud is under a heavy pressure and can cause technical problems.

With the Inverted Sole there is just a one stud that holds the outsole part on its place. There is no pressure to this one stud, because the pressure points are inside of the outsole part. inverted Sole is simple, effective and it works really well.